To prevent severe personal injury or death, read this section carefully before using the flatbed printer to ensure proper and safe handling of the unit.
1）Before using this equipment, strictly install the ground wire as required and always check that the ground wire is in good contact.
2）Please be sure to correctly equip the power supply according to the rated parameters and ensure that the power supply is stable and the contact is good.
3）Do not attempt to modify the device and replace non-factory original parts to avoid damage.
4）Do not touch any part of the printer device with wet hands.
5）If the printer has smoke, if it feels too hot when it touches the parts, it emits an unusual noise, smells a burnt smell, or if the cleaning fluid or ink accidentally drops onto the electrical components, stop operation immediately, turn off the machine, and disconnect the main power supply. , contact with the win-win company. Otherwise, the above conditions may cause severe damage to the related accessories or even fire.
6）Before cleaning, maintaining, or troubleshooting the inside of the printer, be sure to turn off and unplug the power plug. Failure to do so may cause electric shock.
7）The track of the printer should be maintained strictly in accordance with the requirements to avoid abrasion of the printer track due to dust, etc., and to reduce the service life of the track.
8）To ensure the cleanliness of the work environment is critical to the normal use of the printer and good print results.
9） In the event of a thunderstorm, stop operating the machine, turn off the machine, disconnect the main power switch, and unplug the machine from the power outlet.
10）The Printhead is a precision device. When you are operating the relevant maintenance of the nozzle, you should strictly follow the requirements of the manual to avoid damaging the nozzle and the nozzle is not covered by the warranty.
●Operator safety
This section provides you with important safety information. Please read it carefully before operating the equipment.
1）Chemical materials：
·The UV ink and cleaning liquid used on the flatbed printer equipment are easily volatilized at room temperature.
Please store it properly.
·After the cleaning evaporates, it is flammable and explosive. Please keep it away from fire and take care of it.
·Wash the liquid into the eyes and rinse with clean water in time. Seriously, quickly go to the hospital for
treatment.
·Wear protective gloves and goggles when you come into contact with ink, cleaning fluids, or other production
waste.
·The cleaning can irritate the eyes, throat, and skin. Wear work clothes and professional masks during production.
·The density of the cleaning vapor is greater than the air density, which generally stays in the lower space.
2）Equipment Utilization：
·Non-professionals are not allowed to print jobs to avoid personal injury or equipment damage.
·When operating the printer, care should be taken to ensure that there are no other items on the work surface to
avoid collisions.。
·When the printhead carriage walking, the operator should not be too close to the car to avoid scratching.
3）Ventilation：
Cleaning liquids and uv inks are easily volatilized. Breathing vapors for a long time may cause dizziness or other symptoms. The workshop must maintain good ventilation and exhaust conditions. Please refer to Appendix for ventilation section.
4）Fireproof：
·Cleaning liquids and uv inks should be placed in storage cabinets specially designed for holding inflammable and
explosive liquids, and they should be clearly marked. Details should be implemented in accordance with local fire
department regulations.
·The work shop should be kept clean and the indoor power supply should be safe and reasonable.
·Flammable materials should be properly placed away from power sources, fire sources, heating appliances, etc.
5）Waste treatment：
Proper disposal of discarded cleaning fluids, inks, production waste, etc. to avoid environmental pollution. Try to use fire to burn it. Do not pour it into rivers, sewers or bury it. The detailed rules shall be implemented in accordance with the provisions of the local health and environment department.
6）Special circumstances：
When a special condition occurs during the operation of the equipment, turn off the emergency power switch and the main power switch of the equipment and contact us.
1.3 Operator skills
Operators of UV flatbed printers should have the skills to perform print jobs, properly maintain equipment, and perform simple repairs. Be able to master the basic application of the computer, have a certain understanding of the software for editing pictures. Familiar with common knowledge of electricity, strong hands-on ability, can assist in related operations under the guidance of company technical support. Love, professional and responsible.